Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Four Corners, TX
Gate access control in Four Corners usually means one of two things: a keypad or card reader that stopped recognizing codes after a storm, or an HOA community entry system that works for some neighbors and not others. The housing here, built mostly in the 2000s and 2010s, came with ornamental steel gates tied to automatic operators, and the humid subtropical climate means those systems spend their entire life fighting moisture, rust, and shifting ground. Call (346) 253-1761 and we’ll walk you through what’s actually wrong before anyone schedules a visit.
Why Four Corners Homes Are Different
Four Corners sits on Fort Bend County’s Vertisol clay, a soil type that swells during wet months and shrinks during dry ones. That movement is easier to understand when a driveway gate post slowly leans out of plumb, or when an entry gate that latched perfectly in January won’t close without a fight in August. The area’s HOA-governed subdivisions like Briargate, Shadow Creek Ranch, and Falcon Landing run on ornamental iron and steel gates, most of them automated, and most of them installed on the same flat, slow-draining lots that make drainage a recurring headache. After a heavy rain, we routinely find gate control boards and loop detectors sitting in water that never fully receded. Homeowners here don’t just replace parts. They waterproof, realign, and reset, then they watch the next storm bring the whole system back into question. It’s a repeat-service market, and the people who live here know it.
Our Main Four Corners Services
These are the three services Four Corners homeowners call us about most often. Each has its own page with the local details, but here’s the short version of what each one involves.
Gate Repair in Four Corners
Structural repairs come first in this market because the soil moves. We handle leaning posts, sagging pickets, failed hinges, latches that won’t catch, and the bent gates that follow every tropical storm season. When a gate can’t physically move, no amount of operator work will fix it. See Gate Repair in Four Corners for the full breakdown on what we see most often and what it costs.
Gate Installation in Four Corners
New installations in Four Corners almost always mean matching an HOA’s specification, which usually means ornamental steel, a specific paint finish, and an operator that integrates with whatever the community already runs. Soil prep matters far more here than in sandier ground to the north. See Gate Installation in Four Corners for the step-by-step process and written pricing approach.
Gate Motor & Opener in Four Corners
Operator work in Four Corners is shaped by water. Low-voltage wiring runs through shallow conduit that the heavy rains flood, and boards short, and loop detectors fail even when the motor itself still works. If your gate swings or slides partway and stops, if the remote works sometimes but not always, or if the keypad feeds power but the gate won’t respond, the operator is usually the issue. See Gate Motor & Opener in Four Corners for the full scope of what we service.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Four Corners
Gate access control in Four Corners sits at the exact intersection of electronics and weather. These are the keypads, card readers, phone entry systems, and video intercoms that tell your gate who to open for and who to keep out, and in this part of Fort Bend County they get abused by humidity, standing water, and lightning. After any significant rain event, we see the same pattern: a keypad that reads codes but won’t trigger the relay, a card reader that worked yesterday and is dead today, a phone entry system that rings a line that no longer exists. For the full range of what falls under this service, see our Gate Access Control page.
Keypad Entry
Signs you need it
The keypad lights up and accepts your code, but the gate doesn’t move.
What it costs in Four Corners
Keypad replacement typically runs $225 to $450, depending on whether we’re replacing just the keypad or also pulling new wiring through wet conduit.
How we do it
We test voltage at the keypad, check the relay in the operator, replace what’s bad, and photograph every connection we touch.
Video Intercom
Signs you need it
The outdoor station rings but you can’t hear or see anyone, or the video feed is a solid blue screen.
What it costs in Four Corners
Video intercom repair runs $250 to $600, and full replacement with a modern unit usually lands between $600 and $1,300 for residential properties.
How we do it
We check the power source, the camera module, the indoor monitor, and the cable path, then replace or reseal whatever the humidity got to first.
What Gate Access Control Costs in Four Corners
| Item | Typical range in Four Corners |
|---|---|
| Keypad replacement | $225 - $450 |
| Phone entry system repair | $200 - $500 |
| Card reader repair or replacement | $250 - $650 |
| Video intercom system | $600 - $1,300 |
Does a flooded access control board need to be replaced or can it be dried out?
Once water has sat on a board long enough to short it, drying it out almost never restores it reliably. We replace the board, trace where the water came in, and seal the housing so the next storm doesn’t do the same thing.
Can you integrate an access control system with a gate operator that’s already in place?
Yes. We service the operator brands that dominate Four Corners including LiftMaster, Mighty Mule, and FAAC, and we wire the access control device into whatever motor is already on the property rather than pushing a full replacement.
Gate Parts & Welding in Four Corners
Welding and part replacement in Four Corners means working on ornamental steel that has spent years in high humidity and heavy rain. Rust starts at the welds first, hinge pins wear before the pickets do, and the clay soil does its part by twisting posts out of line. The most common job is a hinge replacement that turns into a weld repair once we grind the old one off and see what’s underneath. This is the work we document most heavily because the next technician shouldn’t have to rediscover what we found. See Gate Parts & Welding for the full parts and welding service range.
Hinge Replacement
Signs you need it
The gate drags on the ground, squeals when it moves, or sags visibly at the latch side.
What it costs in Four Corners
Hinge replacement or repair averages $150 to $300 per hinge, depending on whether we weld a new one or rebuild the original.
How we do it
We cut or grind off the old hinge, inspect the post for rust, weld or bolt the replacement, and photograph the finished penetration.
Gate Rollers
Signs you need it
A sliding gate shudders or sticks as it moves, especially when it reverses off the track.
What it costs in Four Corners
Roller replacement runs $120 to $300 per roller, including the carrier hardware and adjustment.
How we do it
We lift the gate, pull the old rollers, replace any deformed carrier brackets, and realign the gate on its rail so it rolls without binding.
What Gate Parts & Welding Costs in Four Corners
| Item | Typical range in Four Corners |
|---|---|
| Hinge replacement (per hinge) | $150 - $300 |
| Gate rollers (per roller) | $120 - $300 |
| Custom welding repair | $180 - $550 |
Can you weld a gate in Four Corners without leaving a scar?
We grind the repair flush, blend the weld to the surrounding profile, and prime the area. The repair will be visible as a patch, but it won’t stand out as sloppy, and we photograph the whole sequence before we leave.
How do I know if a post needs resetting or just welding?
If the post has moved out of plumb, welding anything to it just makes the next failure more expensive. We check level and measure the gap before touching the welder, and we’ll tell you which one is the root cause.
Brands We Service in Four Corners
We service LiftMaster, FAAC, and Mighty Mule operators in Four Corners daily, along with the control boards and remotes that go with them. Parts for the most common residential operators in the area stay in the truck, so we’re not ordering a relay board and waiting a week while your gate is stuck open. See our brands for the full list.
Pricing for Gate Repair in Four Corners, TX
| Service | Typical range in Four Corners |
|---|---|
| Keypad replacement | $225 - $450 |
| Phone entry system repair | $200 - $500 |
| Card reader repair or replacement | $250 - $650 |
| Video intercom system | $600 - $1,300 |
| Hinge replacement (per hinge) | $150 - $300 |
| Gate rollers (per roller) | $120 - $300 |
| Custom welding repair | $180 - $550 |
| Post reset or re-alignment | $250 - $600 |
Prices in Four Corners get pushed up when water has gone further than expected, when a gate has to be pulled and re-hung to reach a failed part, or when a structural problem needs fixing before any electronic part can work. Every price is written and handed to you before anyone picks up a tool. That written price is the final price, no matter what we find while we’re working.
Neighborhoods We Serve in Four Corners
We work across Four Corners from the master-planned communities near Highway 6 to the smaller enclaves off the Fort Bend Parkway. Most calls get a technician dispatched the same day, often within a few hours for gate access control failures where the gate won’t open at all.
- Briargate
- Shadow Creek Ranch
- Falcon Landing
- Creekside at Cross Creek
Service Area - Cities Near Four Corners
If you’re in a neighboring community, we cover those too. Our dispatch runs from the Houston office and includes Missouri City, TX, Fresno, TX, Stafford, TX, and Sugar Land, TX. Same written pricing, same documented photo record, same live person on the phone.
Serving Four Corners, TX - Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Four Corners
For a gate that won’t open or close, we consistently arrive the same day, usually within a few hours, and often faster than the dispatch estimates. A live person answers the phone 24/7, not a voicemail queue. When you call (346) 253-1761, you’ll get a name and a realistic arrival window.
That depends on your community’s covenants, but in many Four Corners subdivisions, structural changes to a perimeter gate require a quick architectural review. Repairs that match the original material and finish usually don’t. We document what we do so you can share the record with your community manager if they ask.
We cover every completed job with the 365-Day Done Right Promise: if the repair isn’t right, we make it right, no argument and no fee within a full year. The written scope from the first visit tells us exactly what was done, and the photo record shows the condition we left it in.
If your gate access control has failed, a hinge is failing, or your gate needs a welder who works in Four Corners and understands the clay, the humidity, and the HOA’s expectations, call (346) 253-1761. We’ll put the price in writing and give you a documented record of everything we find. No surprises, no hassle, no gate left to rust.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Four Corners Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.