Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Greatwood, TX
Greatwood homeowners call us most often for two problems: access control systems that have stopped reading keypads or remotes, and gate parts that have rusted, snapped, or shifted out of alignment. This master-planned community sits on Fort Bend County’s expansive black clay, which heaves and shrinks with every wet-dry cycle and slowly pushes gate posts out of plumb. When an operator, hinge, or weld fails here, the soil is almost always part of the story. Call (346) 253-1761 and we’ll tell you what we think before we ever pick up a tool.
Why Greatwood Homes Are Different
Greatwood was built between the late 1980s and early 2000s, which means most of its ornamental wrought iron and aluminum driveway gates are now 20 to 35 years old. That is the age when hinges fatigue, welds crack, and operator control boards start failing. The HOA still governs what a gate can look like, so any repair that changes the visual profile often needs approval before work begins. We photograph everything and document what was found, which helps when an HOA committee asks questions.
The bigger factor is the clay. Fort Bend County’s black gumbo soil absorbs water during heavy rains, swells, then contracts during dry spells. That cycle works gate posts loose over time, even when the concrete footing was poured correctly. A gate that scrapes the ground or won’t latch is rarely just a hinge problem in Greatwood. The post behind the hinge has usually moved. Add extreme summer heat, near-total humidity, and the flood cycles that have hit this area since Hurricane Harvey, and you get accelerated rust on iron components and water infiltration in buried wiring conduit. Gates here fail differently than they do in older Sugar Land subdivisions or Houston proper.
Our Main Greatwood Services
Most Greatwood calls fall into one of these three categories. Each has its own page with full pricing and detail.
Gate Repair in Greatwood
Hinges, welds, sagging frames, latch failures, post movement. In Greatwood, we start by checking whether the posts have shifted in the clay before we touch the gate itself. A repair that ignores the footing will fail within a season. We quote the whole scope in writing, including any post reset, before work starts. Gate Repair in Greatwood
Gate Installation in Greatwood
New ornamental gates on existing posts, full driveway gate replacements, or larger custom builds. Greatwood’s HOA covenants often require design review, and we can provide the documentation your committee needs. We set posts deeper than code minimums because the clay here demands it. Gate Installation in Greatwood
Gate Motor & Opener in Greatwood
Operators that have burned out, control boards that won’t respond, remotes that stopped working after a rain. Greatwood’s buried wiring and humid soil create water-intrusion failures that look like board problems but are actually conduit corrosion. We trace the wiring before replacing parts. Gate Motor & Opener in Greatwood
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Greatwood
Access control in Greatwood usually means a keypad, remote, phone entry system, card reader, or video intercom that governs who gets through the gate. Homes built in the 1990s and 2000s often had first-generation systems installed, and those systems are now failing from age, humidity, and the same soil movement that affects everything else in this community. We service, repair, and replace access control components across the full range of systems, and our Gate Access Control work always includes a documented record of what was replaced and how the settings were left.
Keypad Entry
Signs you need it
Codes stop working, the keypad beeps but the gate won’t open, or buttons have to be pressed multiple times for a response.
What it costs in Greatwood
Keypad replacement in Greatwood typically runs $185-$425, depending on whether we’re replacing just the keypad or also the receiver at the operator.
How we do it
We test the keypad output at the operator first, replace only what has failed, and photograph the new wiring before closing the panel.
Remote Control
Signs you need it
Remotes work only at very close range, one remote stopped working while others still function, or the operator no longer responds to any transmitter.
What it costs in Greatwood
Replacing a failed remote receiver in Greatwood typically runs $160-$290; individual replacement remotes run $35-$75 depending on the brand and frequency.
How we do it
We identify the receiver frequency, verify the operator’s antenna is intact, and program the new remote with the old codes cleared out.
What Gate Access Control Costs in Greatwood
| Item | Typical range in Greatwood |
|---|---|
| Keypad replacement | $185-$425 |
| Remote receiver replacement | $160-$290 |
| Video intercom install or replacement | $500-$1,500 |
Can you come out today to fix a Greatwood gate keypad?
Yes. We schedule access control repair calls same-day across Greatwood. A live person answers at (346) 253-1761, and we’ll give you a written price before any work begins.
Do you replace only the access control part, or do I need a whole new system?
We replace only what has failed. If your keypad has failed but the operator and wiring are sound, you get a new keypad. Call us for a written diagnosis.
Gate Parts & Welding in Greatwood
Greatwood’s iron gates are hitting the age where hinges snap, welds crack, and posts lean far enough to make the gate bind. The clay soil underneath the community accelerates every one of these failures. Our Gate Parts & Welding work addresses the part itself and the reason it failed, which in Greatwood usually means checking the post and footing before welding anything back together.
Hinge Replacement
Signs you need it
The gate drags on the ground, shows visible sag at the hinge point, or makes a grinding noise when it opens and closes.
What it costs in Greatwood
Hinge replacement on Greatwood gates typically runs $165-$420, depending on whether the gate is aluminum or steel and how many hinges have failed.
How we do it
We unload the gate weight, verify the post is still plumb, and weld or bolt the new hinges with the gate re-leveled before we leave.
Post Replacement
Signs you need it
The post leans visibly, the gate scrapes the ground on one side only, or the post moves when you push against it.
What it costs in Greatwood
Post reset and replacement in Greatwood typically runs $300-$800 per post, including concrete and labor, depending on size and depth.
How we do it
We remove the old post, dig a deeper footing than the original, set the new post in concrete, and photograph the depth before we backfill.
What Gate Parts & Welding Costs in Greatwood
| Item | Typical range in Greatwood |
|---|---|
| Hinge replacement | $165-$420 |
| Post replacement | $300-$800 per post |
| Custom welding repair | $175-$750 |
Can you weld my Greatwood gate back together the same day?
Most welding repairs are done in a single visit. We’ll give you a written price and photograph the repair before we leave. Call (346) 253-1761.
Do I need HOA approval before you replace a gate post?
Usually yes, if the post or gate style changes. We’ll give you photos and specifications for the committee, and we can schedule around your approval timeline.
Brands We Service in Greatwood
We work on FAAC, BFT, Linear, and Viking operators in Greatwood, among others, and we stock common remotes, receivers, photo-eyes, and control boards locally for faster turnaround. Whatever motor is on your property, we service it. Learn more on our brands page.
Pricing for Gate Repair in Greatwood, TX
| Service | Typical range in Greatwood |
|---|---|
| Hinge replacement | $165-$420 |
| Post replacement | $300-$800 per post |
| Custom welding repair | $175-$750 |
| Keypad replacement | $185-$425 |
| Remote receiver replacement | $160-$290 |
| Video intercom install or replacement | $500-$1,500 |
| Gate repair (general, including hinge and latch work) | $165-$850 |
| Gate installation (new metal driveway gate) | $1,500-$6,000 |
| Operator/motor replacement | $700-$1,800 |
| Access control installation (keypad, intercom, or card system) | $500-$2,500 |
What pushes a Greatwood gate repair higher is usually the post work. When the clay has shifted a post out of plumb, resetting it adds materials, time, and concrete before the gate itself can be repaired. The written price we hand you before work starts includes everything, so there is no surprise invoice at the end.
Neighborhoods We Serve in Greatwood
We cover all of Greatwood, including the sections around the golf course and the newer cul-de-sac pockets near Crabb River Road. Response time across the community is typically under two hours for emergency gate work.
- Greatwood Trails
- Greatwood Shores
- Greatwood Forest
- Greatwood Lake
- Greatwood Glen
Service Area - Cities Near Greatwood
We also serve homeowners in Missouri City, TX, Fresno, TX, Stafford, TX, and Sugar Land, TX. Scheduling and dispatch are coordinated from the brand’s Houston office, and crews serve Greatwood locally.
Serving Greatwood, TX - Our Local Coverage Area
We’re based in the Greatwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Greatwood
Most Greatwood emergency calls get a technician on site within two hours. A live person answers the phone at (346) 253-1761 any hour, and we give you a written price before starting work.
Repairs that keep the existing look usually proceed without HOA review. Replacements, new gate designs, or visible changes to hardware often need committee approval, and we provide the documentation your HOA will ask for.
Yes. We schedule visits in writing with a named technician and a photo sent before arrival. Same-day service is available for most repair calls, and installation work is booked around your timeline.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Greatwood Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.