Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Houston, TX
Gate access control in Houston usually means one of two things: a keypad or intercom that stopped reading codes after a storm, or an aging HOA entrance system that no longer talks to residents’ phones. Most of the systems we see in River Oaks, Meyerland, and the master-planned communities west of the Beltway were installed between 2005 and 2015, which is exactly the age when control boards corrode, relays stick, and card readers develop intermittent faults from Gulf Coast humidity. Call (346) 253-1761 and a live person answers, day or night. We price the job in writing before we touch a wire.
Why Houston Homes Are Different
Two things define gate work in Houston more than any equipment catalog. First, the soil. Beaumont clay under most of the city swells after rain and shrinks during drought, and it does not do either evenly. A gate post that was dead plumb in May can be half an inch out by August, binding the hinges and forcing the opener’s limit switches to work against the gate on every cycle. Second, the water. Harvey was not an outlier; it was a preview. Operators, control boards, and underground conduit in neighborhoods along Brays Bayou, Greens Bayou, and Buffalo Bayou sat submerged for days, and the corrosion from that event is still failing equipment a decade later. Houston gate repairs tend to be structural first and electrical second, which is the reverse of what a tech from Dallas would expect.
We also work around HOAs here more than anywhere else in Texas. Cinco Ranch, Sugar Land, The Woodlands, Pearland: these communities mandate automated driveway and entrance gates, and those gates are now hitting their first major repair cycle. When an HOA gate fails, it is usually on an access control system shared by hundreds of homes, which changes how fast the job has to move.
Our Main Houston Services
Two services dominate the calls we take from Houston homeowners, and three more have dedicated pages because they warrant their own detail. Here is the short version of each.
Gate Repair in Houston
Most repair calls in Houston come down to one of three failures: a gate that drags on the ground because a post shifted in clay soil, a motor that hums but does not move because the capacitor or circuit board is shot, or a weld that cracked where the gate frame meets its hinge plate. We diagnose against the actual gate, not a generic symptom list, and we photograph the limit-switch readings, board damage, and post angle before writing the scope. Full detail on Gate Repair in Houston.
Gate Installation in Houston
New gate installations here are as much about drainage as they are about welding. We set posts deeper than code minimums where we know the clay runs deep, spec elevated operator mounts in flood-prone lots, and match the gate style to the house: wrought-iron for a Montrose or Heights bungalow, steel tube for a newer Cinco Ranch or Missouri City build. Full detail on Gate Installation in Houston.
Gate Motor & Opener in Houston
Houston humidity does not forgive an undersized opener. Swing gates on clay-shifted posts pull more amperage than the factory spec assumes, and submerged control boards from past flooding keep failing until they are replaced with properly rated enclosures. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we do not steer a repair call toward replacement unless the board is genuinely beyond saving. Full detail on Gate Motor & Opener in Houston.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Houston
Gate access control in Houston means the layer between the motor and the person who wants to get through: keypads, phone entry, card readers, video intercoms. The systems that fail here are almost always older, installed before NEMA 4X enclosures were standard, and they die slowly, not suddenly. A keypad that works after a rain but not during one, a card reader that misses every third swipe, a phone entry system that rings but does not open: these are the calls that make up the bulk of our Gate Access Control work.
Houston’s heat and humidity are the killers. Control boards corrode at the terminal strip, relays develop high resistance, and the cheap power supplies that came with many 2000s-era systems cook themselves inside metal boxes that hit 130 degrees in August. We replace components with sealed, properly rated parts and photograph every connection before closing the enclosure.
Keypad Entry
Signs you need it
A keypad that accepts codes intermittently, works only when dry, or has keys that require hard presses is on its way out.
What it costs in Houston
Most keypad replacements in Houston run $350-$800, depending on brand and whether the wiring is reusable.
How we do it
We pull the old keypad, check the wiring for corrosion, mount the new unit with sealed connectors, program your existing codes, and photograph the finished install.
Video Intercom
Signs you need it
If the video is dark, the audio cuts out when the gate is opened, or the inside monitor no longer rings, the system is failing at the camera, power supply, or master station.
What it costs in Houston
Video intercom repair in Houston typically runs $280-$600; full system replacement on a driveway gate starts around $1,800 and moves up with camera count and monitor type.
How we do it
We test the camera, power supply, and cable runs separately, identify which component actually failed, and replace only that, leaving you a photo log of every connection we touched.
What Gate Access Control Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Keypad replacement | $350-$800 |
| Video intercom repair | $280-$600 |
| Phone entry / card reader board repair | $300-$750 |
Can you fix a gate access system the same day in Houston?
Most access control repairs are same-day if we carry the part, and our trucks stock the common boards and power supplies. If we need to order, we tell you the lead time before we leave.
Will the new access system work with my existing gate motor?
Almost always. We wire access control to work with whatever motor is already on the property rather than forcing a package replacement. Call for a written quote and we’ll confirm compatibility before any work starts.
Gate Parts & Welding in Houston
Gate parts and welding in Houston is where the soil problem shows up hardest. When clay heave throws a post a few degrees out, the first thing to fail is never the electronics; it is the hinge, the rail, the weld at the stress point, or the roller that has been dragging for months. We replace the broken part, re-align the gate, and document the repair. Our Gate Parts & Welding page has the full detail.
Houston’s humidity also accelerates rust on untreated welds far faster than in drier parts of the state. We see one-season-old welds with deep pitting where a handyman used the wrong filler or skipped the primer entirely. Our welding spec is built for this climate, not for a showroom in Lubbock.
Hinge Replacement
Signs you need it
A gate that sags, scrapes the ground, or makes a metallic grinding sound when opening is wearing out its hinges.
What it costs in Houston
Hinge replacement on a standard driveway gate runs $250-$500 per set, depending on gate weight and whether the post needs re-anchoring.
How we do it
We support the gate, cut or unbolt the old hinges, weld or bolt on the new set, reset the plumb, and photograph the new alignment angles.
Post Replacement
Signs you need it
A post that leans, cracks at the anchor bolts, or shows a visible gap at the base is no longer holding the gate’s weight.
What it costs in Houston
Post replacement in Houston usually lands between $600 and $1,400 depending on depth, concrete work, and whether brick cladding needs rebuilding.
How we do it
We remove the failed post, dig or core for a deeper footing to get below the shifting clay, set the new post true with a level, and let the concrete cure before re-hanging the gate.
What Gate Parts & Welding Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Hinge replacement (per set) | $250-$500 |
| Post replacement | $600-$1,400 |
| Rail repair / re-weld | $180-$450 |
Can you weld a broken gate on site in Houston?
Yes. We carry a full mobile welding rig and do most frame, hinge, and rail repairs on site in one visit, including rust prep and primer.
How long does a welded repair last in Houston humidity?
With proper prep, primer, and paint, our welded repairs survive years longer than a bare weld. We photograph the treated joint before and after finish, so there is a record.
Brands We Service in Houston
We stock parts for and service Linear, Viking, Ghost Controls, DoorKing, and the other major automation brands in Houston. Most common boards, remotes, and safety edges are on our trucks, so service calls move quickly. See our brands for the full list.
Pricing for Gate Repair in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Keypad replacement | $350-$800 |
| Video intercom repair | $280-$600 |
| Phone entry / card reader board repair | $300-$750 |
| Hinge replacement (per set) | $250-$500 |
| Post replacement | $600-$1,400 |
| Rail repair / re-weld | $180-$450 |
| Gate roller replacement | $150-$350 |
| Custom welding (per hour) | $90-$140 |
What pushes a Houston price upward: posts set in shifting clay that need deeper footings than the original, flood-corroded wiring that has to be repulled, and brick or stone veneer that must be rebuilt around a new post. Every price is written down and handed over before the first tool comes off the truck. No surprises.
Neighborhoods We Serve in Houston
We run gate repair, access control, parts, and welding calls across Houston, from the inner loop to the master-planned west side. Typical response for repair calls is same-day or next-morning across the area.
- River Oaks
- Meyerland
- Montrose
- The Heights
- Cinco Ranch
Service Area - Cities Near Houston
We work in Bellaire, TX, Pearland, TX, Stafford, TX, and Friendswood, TX, plus the surrounding communities. Dispatch is coordinated from our Houston office, and the same written-quote standard applies on every job.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
Most repair calls are same-day or next-morning. A live person answers the phone 24/7, and dispatch covers the whole Houston metro without routing through a national call center.
For single-family driveway gates, usually not. For community entrance gates, the HOA typically needs to sign off. We can provide written scopes and photo documentation to submit with the request.
Yes. We see submerged operators and control boards regularly in Meyerland, Friendswood, and the Energy Corridor. We assess what can be dried and saved, replace what cannot, and spec NEMA-rated enclosures so the next flood does less damage.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.